Description

Brand                                :           “BSB”

Country of origin           :           ITALY- TURKEY JOINT VENTURE.

Shipping port                  :           “ISTANBUL”

Capacity                           :           480kg / 06Passengers.

Speed                                 :           1.0 m/s

Drive system                    :           AC – VVVF (Variable Voltage Variable Frequency)

• Smooth starting
• Smooth stopping
• Proper leveling
• Savings of power consumption up to 50%
• Longer life of equipment’s

Security Standard          :         EN 81.1(European Safety Code)

Conformity                      :         European Quality Standard.

Floor designation           :         GF-1-2-3-4 -5-6-7(For Eight Stops)

Car travel                        :         24000 mm APPROX

Number of stops             :       08Floor / 08Entrance

Motor                              :      6.5 KW   (Extra Lifting Load)  KW ± 10%, Alberto Sassi- Italy                                                                                                                                                                                                                                                                                                      

Controller                    :       Mik-el (Turkey)

Inverter                        :       Mik-el/ Yaskawa (Turkey)

Contractor                  :      (V.V.V Built-In Incoder & Inverter,Farmator-ITALY BSB             

Door hanger               :     Farmator- ITALY

Guide Rail                   :      Asray-Turkey/European

Steel Rope                   :     IZMIT CELIK A.S /SEALS(Construction bright steel wires with fiber cores)- European

Operation                       :    Simplex Full collective -selective control Control with –Microprocessor..

Cop & Lop                    :     Stainless steel panel with LCD /Digital Display- EUROPEAN.

Speed Governor  (LOW /Hi)   :   PFB—–Turkish — EUROPEAN

Car dimension                :           Width- 1400 X Depth-1100(required) X Height-2200 mm (Inside)

Shaft dimension             :          Width- 1500(mm) X Depth-1675(mm) 

Overhead                         :           4000mm (Required)

Pit                                      :           1500mm (Required)

Machine room                :           Direct above the shaft Location

Door type                        :           2 panels Full Automatic, centre opening for car and all landings for lift

Door dimension             :          width 800mm (For Center Opening) x Height 2000mm.

Door Sills                         :           Made of anodized aluminum with anti slip grooving and gliding slots.

Door Sensor                   :            Full Height Photo Sensor –DT-17 MK

Safety/ Additional fittings:

1) Emergency light

2) Intercom system

3) Car lights  & fans

 4). Barger  (TALKING)-full set.

5).Cabin& Counter Buffer

.6).Granite Stone Floor .

7)CC TV option

8).Final Limit Switch & Bar Set And All Others-EN 81.1 -EUROPEAN (BSB).

9 )Times in a hour-EUROPEAN.FIRE alarm & Switch. , VOICE announcer-Turkey.

 

Exclusive Device                    : A.R.D (Auto Rescue Device)-Eight

Car/Cabin Fabrication         :          Stainless steel Hair Line finished & rear wall  Stainless steel /Etched/Super                                                                         Mirror /Hair line with Stainless steel Hand rails(Sample).

Car door                                 :           2 panels Full Automatic, Stainless steel / Etched/Super Mirror /Hair line      

                                                               finished(Sample)

Landing Door                     :             2 panels Full Automatic, Main Landing door Wide jam, Stainless steel Hair

                                                              Line finished and all other landing doors also stainless steel hairline

 finished (Sample)

• Final limit switch : EMAS —Turkish
• Evacuation : During power failure the car will be manually moved to the nearest higher or

                                  lower landing and the doors will be opened to facilitate evacuation of passengers.

• Traveling cable :  Flat l round type with required size and number in machine   room and the

                                            shaft in plastic conduits.

• Car & counterweight guide: Special T – Guide rails machined to a high degree of fineness ensure the

                                       smooth running of the elevator.

 

• Buffer : If the car travels beyond the lowest floor or above the top floor the buffer

reduces the shock of traveling cabin & counter weight frame at the bottom of the shaft.

• Maintenance control : Car stop station with an initiating switch, one up and one down button and

 one stop button.

• Pre limit switch : When the magnetic conduct fail to take slow speed in top and bottom floor, there

                                    will have a pre limit switch (Electro mechanical switch) to help take slow speed

                               in top and bottom floor and the lift stops smoothly in the floor level.

 

• Phase failure : If any phase of the main power supply is cut off (absent) , the protection switch

 does not provide supply to control circuit and the lift does not start.

• Phase reversal : If the phase are changed by any external subject such as PDB etc, for the safety of the lift & its passenger this protection switch off the main power supply to the control circuit and the lift does not start.
• Emergency unlocking : All landing doors provide key system for emergency unlocking for landing

                                     for evacuation as well as for maintenance with a special key.

 

Terms & Condition:

DELIVERY:  As per payment schedule.

INSTALLATION  & COMMISSIONING : The lift shall be installed and commissioned within 60 days ± 10 days from the date of delivery.

EXCLUSIONS:

MACHINE ROOM CONSTRUCTION: *Location direct above the shaft *Door for entrance of machine room , * Hook for lifting at middle, *A fan for cooling *Arrangement of water proof * Trap door above the top floor.

POWER ARRANGEMENT *Three phase line of 400 volts in machine room , *Necessary busbar, ducking, MCB etc as per requirement for feeding power to the lift. * Circuit breaker in machine room and ground floor.

3)   That the Purchaser shall make payment of the price of the lift as follows:                                                 

                           FINANCIAL OFFER ( 100%-INTAKE))

Sample Price Structure

OPTION	Description	Price at BDT
01 Unit Passenger Lift.  With ARD	BSB   Brand : ITAL- TURKEY JOINT VENTURE. Passenger lift of 480kg / 06Person, 08stops,  Car & Landing Doors- As Per Brand,1.0 m/s–Speed . Door –mechanism-Farmator-ITALY Gear motor – 6.5Kw – Alberto Sassi / ITALY. Guide rail- Asray –Turkey, Control – Mik-el- Turkey /European. COP&LOP – L.E.D/Digital – EUROPEAN   NB: 100% Machineries will be imported from ITALY & Turkey	17,50,000.00
Total Price		17,50,000.00

Amount in Word: Seventeen Lac Fifty Thousand Taka Only.

 

1. Price are including Govt. duty, tax, supply, installation, testing and commissioning.
2. Any other in house (By the client) Taxes/vat will not be added to the price.
3. Client may open the L/C by himself.

       4.If the government impose any new taxes, that will be added to the price.

 

4. The supplier agrees to give the REPLASEMENT GUARANTY 03 (three) Years (For Motor &

       Controller) And 02(Two) Years Warranty Others Parts from the date of commissioning.

   Warranty covers replacement of any defective parts due to manufacturing defects and comes from

   bad workmanship. The warranty will not be enforceable if any parts become damage for ill

   Handling & electrical over / low power supply.

5. The Purchaser agrees to make ready the sites as follows:
6. a) All civil work required to ready the shafts and machine rooms will be done by the Purchaser.
7. b) The purchaser will provide electrical power fine of 400 volts, 3 phases, up to machine room, circuit breaker of 63 amps, and all electrical arrangements including MDB and SDB necessary for the lifts.
8. c) The purchaser will provide a stare at site u1nder their own control to keep the materials ‘in a suitable condition.
9. Free Servicing: 01 year from the date of trial run operation/after installation.
10. That this agreement shall be executed in two counterparts, one for the Supplier and the other for

         the Purchaser.

9. That if due to Force Measure, such as war, invasion acts of god revolution, civil riots and acts of government, the performance if the agreement could not be carried out, the time for the performance of such obligation shall be extended for the period for which circumstances and their effects remains enforce.

 

PAYMENT SCHEDULE

 

Installments	Amount	Payment date
first	40%(Negotiable)  of sales value	During signing the agreement to open the L.C
Second	50%(Negotiable)  of sales value	To retire the shipping documents from bank for custom clearance & Delivery  lift from the  Cht .port
Third	05%(Negotiable)  of sales value	For  the  start the lift installation work at site.
Final	05% of sales value	After  INSTALLATION & COMMISSION the materials at project for TEST RUN for Handover.

 

On the above all, we are always at your service.