ELEVATOR  SPECIFICATIONS

Capacity	Floor/Stop	System	Roping	Speed
1250 Kg	15	MRL	2:1	1.6 m/sn
1250 Kg	15	MR	2:1	1 m/sn

 

Traction Machine	Model	Kw	VVVF	Travel
MRL (A. SASSI)	G300-T2	12	240-9 x 6.5	47000 mm
MR   (A. SASSI)	TORO	17.6	650 x 5 x 12	47000 mm

 

Country of origin                : TURKEY  & ITALY

Shipping port                        :“ISTANBUL”

Security Standard              :EN 81.1 (European Safety Code)

Shaft dimension (1)           :Width 2000(mm) X Depth-2600(mm) – MRL

Shaft dimension (2)           :Width 2080(mm) X Depth-2600(mm) – MR

Door dimension                  : width 900mm (For Center Opening) x Height 21000mm.

Machine room                     : Direct above the shaft Location

Overhead                               : 4000mm (Required)

Pit                                             : 1500mm (Required)

Machine Frame                  : Included

Car Door                              : FERMATOR – 2P – 900X2000 HAIRLINE

Landing Door                      : 2 panels Full Automatic, Main Landing door Wide jam, Stainless steel

finished and all other landing doors also stainless steel  hairline finished

Landing Door – Ground   : FERMATOR – 2P – 900X2000 HAIRLINE

Landing Door – Other Fl.  : FERMATOR – 2P – 900X2000 HAIRLINE

Car Model                           : BSB MAHI – 1275 kg.

Car Walls                             : Decorative st. st.

Car Accessories                  : Super Mirror st. st.

Car Floor                              : Rosa Beta

Car Ceiling                           : Laser cut with indirect lighting T-20 B

Car Frame                            : Prog. Safety Gear + 2 pcs. Pulley (MRL) – 16P

Overload                              : Electronically Overload (4)

Photocell                             : Full Height

Mirror                                  : Half Height

Counterweight                   : Double Line + 1 pc. Pulley (MR) / (MRL)

Fillings                                  : Special RCC – 600 mm.

Separators Sheet               : Included

Bracket                                : Included

Car Guide Rail                    : 105 m Asray – 90x75x16 mm./B

CW Guide Rail                    : 105 m Asray – 70x65x9 mm.

N.B:  100% Straight, Non Rusted, Tempered Mild Steel For Heavy Duty , 10mm- Asray /European

Car Rope                              : 544 m

Governer Rope                   : 111 m

(SEALS (Construction bright steel wires with fiber cores),- IZMIT CELIK A.S- European).

COP	LSPN 2000 – 15 ST. Hairline Full Height,  7 Segment
LOP	PSXT-251 , 7 Segment
Floor Indicator	N/A

 

Controller                            : 15 kw A-Drive ARL-300 VVVF – RT Hi Tech-Arcode

(3^rd Generation-Turkey) Exclusive. Loop operative motherboard,

VVVF with microprocessor. BSB (Turkey)

Inverter                                : Mik-el (Turkey)

Drive system                        : AC – VVVF (Variable Voltage Variable Frequency)

• Smooth starting
• Smooth stopping
• Proper leveling
• Savings of power consumption up to 50%
• Longer life of equipment’s

 

Speed Governor                     :  PFB–Turkish –European (An over speed governor is an elevator device

Which act as a stop device in case the elevator runs beyond the rated speed. This device must

Be installed in the traction elevators and roped hydraulic elevators.

 

Exclusive Device (Optional):  A.R.D (Auto Rescue Device) 

Additional fitting& Safety:  (1) Emergency light (2) Intercom system {3) Car lights & fans

(4).Overload Devise (5) U.P.S. with 1.5 Hrs Power Back up.

   (6). Barger (talking) full set (7).Cabin& Counter Buffer. CENTA

  (8).Final Limit Switch & Bar Set and All Others EMAS. 

• Evacuation :  During power failure the car will be manually moved to the nearest higher or

                                           Lower landing and the doors will be opened to facilitate evacuation of passengers.

 

• Traveling cable :  Travel Cable – 36×075 

                                                     Flat l round type with required size and number in machine   room and the shaft

• Car & counterweight guide : Special T – Guide rails machined to a high degree of fineness ensure the smooth running of the elevator.
• Buffer (Car & Cw)  : HYDRAULIC – 1,6  

                                            If the car travels beyond the lowest floor or above the top floor the buffer reduces

                                            The shock of traveling cabin & counter weight frame at the bottom of the shaft.

• Maintenance control :  Car stop station with an initiating switch, one up and one down button and one stop button.

 

• Pre limit switch : When the magnetic conduct fail to take slow speed in top and bottom floor, there will have a pre limit switch (Electro mechanical switch) to help take slow speed in top and bottom floor and the lift stops smoothly in the floor level.
• Final limit switch : If the car travels above top floor level or below bottom floor level it cuts off the main power of motor and stops functioning the lift.
• Phase failure : If any phase of the main power supply is cut off (absent) , the protection switch does not provide supply to control circuit.               
• Shaft Lighting Cable : 25 mt
• Oil Pot                     : 4 Ps
• Exclusive Device : A.R.D (Auto Rescue Device)
• Emergency unlocking: All landing doors provide key system for emergency unlocking for landing for evacuation as well as for maintenance with a special key.

Terms & Condition:

DELIVERY:           The lift shall be Shipment and Delivered within 90 days from the date of L/C. As per Contact and payment schedule.

INSTALLATION  & COMMISSIONING : The lift shall be installed and commissioned within 30 days ± 10 days from the date of delivery.

EXCLUSIONS:

MACHINEROOM CONSTRUCTION:  *Location direct above the shaft *Door for entrance of machine room * Hook for lifting at middle, *A fan for cooling *Arrangement of water proof * Trap door above the top floor.

POWER ARRANGEMENT *Three phase line of 400 volts in machine room , *Necessary bus bar, ducking, MCB etc as per requirement for feeding power to the lift. * Circuit breaker in machine room and ground floor. *That the Purchaser shall make payment of the price of the lift as follows: 

4. The supplier agrees to give the REPLASEMENT GUARANTY Of 05 (Five) Years (For Motor/Machine & Controller) And 01One Year Warranty Others Parts from the date of commissioning. Warranty covers replacement of any defective parts due to manufacturing defects and comes from bad workmanship. The warranty will not be enforceable if any parts become damage for ill handling & electrical over / low power supply.
5. The Purchaser agrees to make ready the sites as follows:
6. a) All civil work required to ready the shafts and machine rooms will be done by the Purchaser.
7. b) The purchaser will provide electrical power fine of 400 volts, 3 phases, up to machine room, circuit breaker of 63 amps, and all electrical arrangements including MDB and SDB necessary for the lifts.
8. c) The purchaser will provide a stare at site u1nder their own control to keep the materials ‘in a suitable condition.
9. Free Servicing: 01 year from the date of trial run operation.
10. That this agreement shall be executed in two counterparts, one for the Supplier and the

    other  for the Purchaser.

8. That if due to Force Measure, such as war, invasion acts of god revolution, civil riots and acts of government, the performance if the agreement could not be carried out, the time for the performance of such obligation shall be extended for the period for which circumstances and their effects remains enforce.

 

FINANCIAL OFFER

 Sample Price Structure

OPTION-01	Description	Price at BDT.
1 Unit     Lift. ( With ARD).	BSB   Brand – Turkey, Passenger lift of 1250kg / 15stops,Car & Landing Doors- As Per Brand,1.0/1.6 m/s–Speed . Door –mechanism–Farmator-Turkey, Gear & motor– Alberto Sassi–   ITALY ,Guide rail- Asray – Turkey, Control – Hi Tech-Arcode 3rd Generation – Turkey/European .COP&LOP – L.E.D/ Digital –European NB: 100% Machineries will be imported.	MR TOtal= 30,50,000 Total= 31,00,000
Price are including Govt, duty, tax, supply, installation, testing and commissioning.

 

PAYMENT SCHEDULE ( For Intake)

Installments	Amount	Payment date
first	40%(Negotiable)  of sales value	During signing the agreement to open the L.C
Second	50%(Negotiable)  of sales value	To retire the shipping documents from bank for custom clearance and also delivery the lift goods for ports.
Third	05% of sales value	During INSTALLATION & COMMISSION the materials at project for TEST RUN .
Final	05% of sales value	Within one month from the date of TEST RUN operation For Handover.

 

On the above all, we are always at your service.